Smc-networks TigerAccess SMC7816M Uživatelský manuál stáhnout pdf (Strana 491)

To set the timeout to two minutes, enter this command:

exec-timeout

This command sets the interval that the system waits until user input is

detected. Use the no form to restore the default.

exec-timeout [seconds]

no exec-timeout

seconds - Integer that specifies the timeout interval.

(Range: 0 - 65535 seconds; 0: no timeout)

Default Setting

CLI: No timeout

Telnet: 10 minutes

Command Mode

Line Configuration

Command Usage

• If user input is detected within the timeout interval, the session is kept

open; otherwise the session is terminated.

• This command applies to both the local console and Telnet

connections.

• The timeout for Telnet cannot be disabled.

• Using the command without specifying a timeout restores the default

To set the timeout to two minutes, enter this command:

Console(config-line)#timeout login response 120

Console(config-line)#

Console(config-line)#exec-timeout 120

Console(config-line)#

Žádné komentáře

Smc-networks TigerAccess SMC7816M Uživatelský manuál Strana 491