Smc-networks SMC9432BTX Uživatelský manuál Strana 50

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 76
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 49
A-2
T
ROUBLESHOOTING
PCI Compatibility
Early versions of PCI BIOS do not properly support the PCI
specification and may “hang” when a LAN driver tries to load. If
this occurs, make sure your BIOS correctly supports the PCI Local
Bus Specification (v2.0 or later).
Some PCI computers are not self-configuring and force you to
perform some or all of the following functions by motherboard
jumper changes and/or BIOS commands:
Verify that the slot is a bus-master and not a slave PCI slot. In
some instances, the PCI slot must be configured to support bus
mastering.
Configure the PCI slot to support INTA.
Assign INTA to a free IRQ (interrupt) number.
Consult your computer manual for information on changing
motherboard jumper settings and BIOS SETUP parameters for use
with PCI network cards. If you set a motherboard jumper and
modify the computer's BIOS, make sure the jumper and BIOS
settings match.
Zobrazit stránku 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

Komentáře k této Příručce

Žádné komentáře