SMC Networks Barricade Wireless Broadband Router Uživatelský manuál

Wireless Broadband Router User Guide The information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no resp

-9- LED: LED Function Color Status Description M1 System status 1 Orange Blinking This product is functioning properly On This product is working

-10- 2.1.2. Rear Panel Figure 2-2 Rear Panel Ports: Port Description ON/OFF Power switch DC IN Power inlet (DC 5V) COM Serial port (connect analog mo

-11- 2. Set up LAN connection: a. Wired LAN connection: connect an Ethernet cable from your computer’s Ethernet port to one of the LAN ports of this

-12- 4. Power on: By connecting the power cord to the power inlet and turning the power switch on, this product will automatically enter the self-test

-13- Chapter 3 Network Settings and Software Installation To use this product correctly, you have to properly configure the network settings of yo

-14- Request timed out.there must be something wrong in your installation procedure. You have to check the following items in sequence: 1. Is the Eth

-15- Step 2: Click on the INSTALL button. Wait until the following Welcome dialog appears, and click on the Next button. Step 3: Select the destinati

-16- Step 4: When the following window is displayed, click on the Finish button. Step 5: Select the item to restart the computer, then click the OK b

-17- Chapter 4 Configuring Wireless Broadband Router This product provides a Web-based configuration scheme, i.e., configuring by Netscape Communi

-18- 4.2 Status This option provides the function for observing this product’s working status: A. WAN Port Status. If the WAN port is assigned a d

-1-

-19- 4.3 Toolbox This option enables you to change the administrator password. You can also get information about Firmware version and WAN's MAC

-20- 4.4 Primary Setup This option is essential to enable this product to work properly. The setting items and the web appearance depend on the WAN t

-21- 4.4.1 Static IP Address WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting value provided by your ISP. 4.4

-22- 4.5 DHCP Server The settings of the TCP/IP environment include Host IP, Subnet Mask, Gateway, and DNS configurations. It is not easy to correctl

-23- 4.6 Virtual Server This product’s NAT firewall filters out unrecognized packets to protect your Intranet, thus all hosts behind this product are

-24- 4.7 Special AP Some applications require multiple connections, such as Internet games, video conferencing, Internet telephony, etc.. Due to the

-25- 4.8 Access Control Access Control allows you to assign different access rights to different users. First, you have to divide users into differen

-26- 4.9 Misc. Items 1. IP Address of DMZ Host: DMZ (Demilitarized Zone) The host is one without the protection of firewall. It allows a computer to

-27- 4.10 Wireless Setting Wireless settings allow you to set the wireless configuration items. 1. Network ID(SSID): Network ID is used to identify

-28- Chapter 5 Print Server This product provides the function of the network print server for MS Windows 95/98/NT/2000 and Unix-based platforms. Yo

-2- Trademarks: SMC is a registered trademark and Barricade is a registered trademark of SMC Networks, Inc. Other products and company names are tr

-29- 1. Find out the corresponding icon of your server printer, for example, the HP LaserJet 6L. Click the mouse’s right button on that icon, and the

-30- 3. Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the corre

-31- Compared to the procedure in the previous section, the selection of Details is equivalent to the selection of Ports, and Port Settings is equival

-32- 5.4 Configuring on Unix-based Platforms Please follow the traditional configuration procedure on Unix platforms to set up the print server of thi

-33- Appendix A: TCP/IP Configuration for Windows 95/98 This section advises on how to install TCP/IP protocol into your personal computer. It assume

-34- 5. Select the Microsoft item in the manufacturers list. Choose TCP/IP in the Network Protocols. Click OK button to return to Network window. 6.

-35- 2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window

-36- a. Select Obtain an IP address automatically in the IP Address tab.

-37- b. Do not input any value in the Gateway tab.

-38- c. Choose Disable DNS in the DNS Configuration tab.

-3- Table of Contents Chapter 1 Introduction ... 5 1.1 Functions and Fe

-39- B. Configure IP manually a. Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.123.254. There

-40- b. In the Gateway tab, add the IP address of this product (default IP is 192.168.123.254); in the New gateway field and click Add button.

-41- c. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button.

-4- Appendix A: TCP/IP Configuration for Windows 95/98... 33 A.1 Install TCP/IP Protocol into Your PC ...

-5- Chapter 1 Introduction Congratulations on your purchase of this outstanding SMC Wireless Broadband Router. This product is designed specifically

-6-  DHCP server supported All of the networked computers can retrieve TCP/IP settings automatically from this product.  Web-based configuring Con

-7- Chapter 2 Hardware Installation 2.1 Panel Layout 2.1.1. Front Panel The front panel features three 10/100 Mbps Ethernet ports, one Wide Area net

-8- WAN: the port where you will connect your cable (or DSL) modem or Ethernet router. Port 1-3: the ports where you will connect networked computers