SMC Networks SMC6608M Uživatelský manuál stáhnout pdf (Strana 39)

Selecting a Site

Before you start actual hardware installation, make sure you can

provide the right operating environment, including power

requirements, sufficient physical space and proximity to other

network devices. Verify the following installation requirements:

◆ The site should:

• be located in a cool, dry place, with at least 4 in. (10 cm)

of space at the front and back for ventilation

• be located out of direct sunlight and away from heat

sources or areas with a high amount of electromagnetic

interference

• allow the status LEDs to be clearly visible

◆ Make sure twisted-pair cable is always routed away from

power lines, fluorescent lighting fixtures and other sources

of electrical interference (i.e., radios, transmitters, etc.).

◆ Make sure that a separate grounded power outlet that

provides 100 to 240 VAC, 50 to 60 Hz, is within 8 feet

(2.44 m) of the unit. The switch’s power supply

automatically detects the input voltage level. And, as with

any electronic equipment, using a filter or surge suppressor

is recommended.

INSTALLATION

3-2

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 112 113

Žádné komentáře

SMC Networks SMC6608M Uživatelský manuál Strana 39