SMC Networks SMC6724L3 Uživatelský manuál Strana 514

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 618
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 513
C
OMMAND
L
INE
I
NTERFACE
4-228
clear ip route
Use this command to remove dynamically learned entries from the IP
routing table.
Syntax
clear ip route {network [netmask] | *}
network – Network or subnet address.
netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
* – Removes all dynamic routing table entries.
Command Mode
Privileged Exec
Command Usage
This command only clears dynamically learned routes.
•Use the no ip address command to remove a local interface.
•Use the no ip route command to remove a static route.
Example
show ip route
Use this command to display information in the IP routing table.
Syntax
show ip route [config | address [netmask]]
config – Displays all static routing entries.
address – IP address of the destination network, subnetwork or host
for which routing information is to be displayed.
netmask - Network mask for the associated IP subnet. This mask
identifies the host address bits used for routing to specific subnets.
Command Mode
Privileged Exec
Console#clear ip route 10.1.5.0
Console#
Zobrazit stránku 513
1 2 ... 509 510 511 512 513 514 515 516 517 518 519 ... 617 618

Komentáře k této Příručce

Žádné komentáře