SMC Networks SMC6724L3 Uživatelský manuál Strana 308

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 618
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 307
C
OMMAND
L
INE
I
NTERFACE
4-22
speed
Use this command to set the terminal lines baud rate. This command sets
both the transmit (to terminal) and receive (from terminal) speeds. Use the
no form to restore the default setting.
Syntax
speed bps
no speed
bps - Baud rate in bits per second.
(Options: 9600, 19200, 38400, 57600, 115200 bps)
Default Setting
9600 bps
Command Mode
Line Configuration
Command Usage
Set the speed to match the baud rate of the device connected to the
serial port. Some baud rates available on devices connected to the port
might not be supported. The system indicates if the speed you selected
is not supported.
Example
To specify 57600 bps, enter this command:
Console(config-line)#speed 57600
Console(config-line)#
Zobrazit stránku 307
1 2 ... 303 304 305 306 307 308 309 310 311 312 313 ... 617 618

Komentáře k této Příručce

Žádné komentáře