SMC Networks TigerAccess SMC7816M Uživatelský manuál Strana 647

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 962
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 646
NEGOTIATION
25-5
negotiation
This command enables autonegotiation for a given interface. Use the no
form to disable autonegotiation.
Syntax
[no] negotiation
Default Setting
Ports 1-16: Permanently disabled
Ports 17-19: Enabled
Command Mode
Interface Configuration (Ethernet - Ports 17-19, Port Channel)
Command Usage
1000BASE-T does not support forced mode. Auto-negotiation
should always be used to establish a connection over any
1000BASE-T port or trunk.
When auto-negotiation is enabled the switch negotiate the best
settings for a link based on the capabilites command. When
auto-negotiation is disabled, you must manually specify the link
attributes with the speed-duplex and flowcontrol commands.
If autonegotiation is disabled, auto-MDI/MDI-X pin signal
configuration will also be disabled for the RJ-45 ports.
Example
The following example configures port 11 to use autonegotiation.
Related Commands
capabilities (25-6)
speed-duplex (25-3)
Console(config)#interface ethernet 1/11
Console(config-if)#negotiation
Console(config-if)#
Zobrazit stránku 646
1 2 ... 642 643 644 645 646 647 648 649 650 651 652 ... 961 962

Komentáře k této Příručce

Žádné komentáře