Smc-networks SMC TigerStack IV SMC6224M Uživatelský manuál stáhnout pdf (Strana 124)

100

101

ONFIGURING

THE

WITCH

3-70

CLI – This example enables 802.1X globally for the switch.

Configuring Port Settings for 802.1X

When 802.1X is enabled, you need to configure the parameters for the

authentication process that runs between the client and the switch (i.e.,

authenticator), as well as the client identity lookup process that runs

between the switch and authentication server. These parameters are

described in this section.

Command Attributes

• Port – Port number.

• Status – Indicates if authentication is enabled or disabled on the port.

(Default: Disabled)

• Operation Mode – Allows single or multiple hosts (clients) to connect

to an 802.1X-authorized port. (Options: Single-Host, Multi-Host;

Default: Single-Host)

• Max Count – The maximum number of hosts that can connect to a

port when the Multi-Host operation mode is selected. (Range: 1-1024;

Default: 5)

• Mode – Sets the authentication mode to one of the following options:

- Auto – Requires a dot1x-aware client to be authorized by the

authentication server. Clients that are not dot1x-aware will be denied

access.

- Force-Authorized – Forces the port to grant access to all clients,

either dot1x-aware or otherwise. (This is the default setting.)

- Force-Unauthorized – Forces the port to deny access to all clients,

either dot1x-aware or otherwise.

• Re-authen – Sets the client to be re-authenticated after the interval

specified by the Re-authentication Period. Re-authentication can be

used to detect if a new device is plugged into a switch port.

(Default: Disabled)

Console(config)#dot1x system-auth-control 4-107

Console(config)#

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 521 522

Komentáře k této Příručce

Žádné komentáře

Smc-networks SMC TigerStack IV SMC6224M Uživatelský manuál Strana 124

Komentáře k této Příručce

Související produkty a manuály pro Počítačové příslušenství Smc-networks SMC TigerStack IV SMC6224M