Smc-networks SMC TigerStack IV SMC6224M Uživatelský manuál Strana 230

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 522
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 229
C
ONFIGURING
THE
S
WITCH
3-176
Selecting IP Precedence/DSCP Priority
The switch allows you to choose between using IP Precedence or DSCP
priority. Select one of the methods or disable this feature.
Command Attributes
Disabled Disables both priority services. (This is the default setting.)
IP Precedence – Maps layer 3/4 priorities using IP Precedence.
IP DSCP – Maps layer 3/4 priorities using Differentiated Services
Code Point Mapping.
Web – Click Priority, IP Precedence/DSCP Priority Status. Select
Disabled, IP Precedence or IP DSCP from the scroll-down menu, then
click Apply.
Figure 3-76 IP Precedence/DSCP Priority Status
CLI – The following example enables IP Precedence service on the
switch.
Mapping IP Precedence
The Type of Service (ToS) octet in the IPv4 header includes three
precedence bits defining eight different priority levels ranging from highest
priority for network control packets to lowest priority for routine traffic.
The default IP Precedence values are mapped one-to-one to Class of
Service values (i.e., Precedence value 0 maps to CoS value 0, and so forth).
Bits 6 and 7 are used for network control, and the other bits for various
application types. ToS bits are defined in the following table.
Console(config)#map ip precedence 4-228
Console(config)#
Zobrazit stránku 229
1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 521 522

Komentáře k této Příručce

Žádné komentáře