Smc-networks Barricade SMC7004ABR Uživatelský manuál stáhnout pdf (Strana 23)

NSTALLATION

2-3

• 4/8 RJ-45 ports for connection to a 10BASE-T/100BASE-TX

Ethernet Local Area Network (LAN). These ports can auto-

negotiate the operating speed to 10/100 Mbps, the mode to half/

full duplex, and the pin signals to MDI/MDI-X (i.e., allowing

these ports to be connected to any network device with

straight-through cable). These ports can be connected directly to

a PC or to a server equipped with an Ethernet network interface

card, or to a networking device such as an Ethernet hub or switch.

Port 8 on the SMC7008ABR offers an MDI-X or MDI option by

way of separate RJ-45 sockets.

• One RJ-45 port for connection to an xDSL or Cable modem.

This port is fixed at 10/100 Mbps, full duplex. This port only

supports MDI-X pin signals, so you will have to use either

straight- through or crossover cable depending on the port type

used on the modem.

• One RS-232 serial port to connect to an ISDN Terminal Adapter

(TA) or to a PSTN analog modem.

• One parallel printer port that can be connected to a printer. This

printer can then be shared by any LAN users.

The following figure shows the components of the Barricade:

SMC7004ABR

Reset

Power

WAN

10/100

Link/Act

1234

LAN

1234

12V 1A

WAN

COM

PRINTER

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 111 112

Žádné komentáře

Smc-networks Barricade SMC7004ABR Uživatelský manuál Strana 23