Smc-networks ElliteConnect 2.4GHz/5GHz Uživatelský manuál stáhnout pdf (Strana 172)

100

101

Command Line Interface

7-2

gateway if you are managing the wireless bridge from a different

IP subnet. For example:

After you configure the wireless bridge with an IP address, you

can open a Telnet session by performing these steps.

1. From the remote host, enter the Telnet command and the IP

address of the device you want to access.

2. At the prompt, enter the user name and system password.

The CLI will display the “AP#” prompt to show that you are

using executive access mode (i.e., Exec).

3. Enter the necessary commands to complete your desired

tasks.

4. When finished, exit the session with the “quit” or “exit”

command.

After entering the Telnet command, the login screen displays:

Note: You can open up to four sessions to the device via Telnet.

AP#configure

AP(config)#interface ethernet

AP(if-ethernet)#ip address 10.1.0.1 255.255.255.0

10.1.0.254

AP(if-ethernet)#

Username: admin

Password:

AP#

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 321 322

Komentáře k této Příručce

Žádné komentáře

Smc-networks ElliteConnect 2.4GHz/5GHz Uživatelský manuál Strana 172

Komentáře k této Příručce

Související produkty a manuály pro Hardware Smc-networks ElliteConnect 2.4GHz/5GHz