SMC Networks SMC8724M Uživatelský manuál stáhnout pdf (Strana 295)

To specify 57600 bps, enter this command:

This command sets the number of the stop bits transmitted per byte. Use

the no form to restore the default setting.

stopbits {1 | 2}

• 1 - One stop bit

• 2 - Two stop bits

Default Setting

Command Mode

Line Configuration

To specify 2 stop bits, enter this command:

Use this command to terminate an SSH, Telnet, or console connection.

disconnect session-id

session-id – The session identifier for an SSH, Telnet or console

connection. (Range: 0-4)

Command Mode

Privileged Exec

Console(config-line)#speed 57600

Console(config-line)#

Console(config-line)#stopbits 2

Console(config-line)#

Žádné komentáře

SMC Networks SMC8724M Uživatelský manuál Strana 295