SMC Networks SMC8724M Uživatelský manuál stáhnout pdf (Strana 110)

100

101

ONFIGURING

THE

WITCH

3-54

CLI – Use the snmp-server user command to configure a new user name

and assign it to a group.

Configuring SNMPv3 Groups

An SNMPv3 group sets the access policy for its assigned users, restricting

them to specific read and write views. You can use the pre-defined default

groups or create new groups to map a set of SNMP users to SNMP views.

Command Attributes

•

Group Name

– The name of the SNMP group. (Range: 1-32 characters)

• Model – The group security model; SNMP v1, v2c or v3.

• Level – The security level used for the group:

- noAuthNoPriv – There is no authentication or encryption used in

SNMP communications.

- AuthNoPriv – SNMP communications use authentication, but

the data is not encrypted (only available for the SNMPv3 security

model).

- AuthPriv – SNMP communications use both authentication and

encryption (only available for the SNMPv3 security model).

• Read View – The configured view for read access.

(Range: 1-64 characters)

• Write View – The configured view for write access.

(Range: 1-64 characters)

Console(config)#snmp-server user chris group r&d v3 auth md5

greenpeace priv des56 einstien 4-161

Console(config)#exit

Console#show snmp user 4-162

EngineId: 800000ca030030f1df9ca00000

User Name: chris

Authentication Protocol: md5

Privacy Protocol: des56

Storage Type: nonvolatile

Row Status: active

Console#

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 591 592

Komentáře k této Příručce

Žádné komentáře

SMC Networks SMC8724M Uživatelský manuál Strana 110

Komentáře k této Příručce

Související produkty a manuály pro Síťové přepínače SMC Networks SMC8724M