SMC Networks SMC6608M Uživatelský manuál stáhnout pdf (Strana 41)

Mounting

The TigerSwitch 100 is suitable for desktop or rack-mount

installation. A good location is at the center of all the devices

you want to link and near a power outlet.

This switch can also be stacked with other switches on a flat

surface or in a rack. Refer to the following sections: “Mounting

the Switch in a Rack” and “Mounting and Stacking the Switch on

a Flat Surface” for a description of these methods.

Mounting the Switch in a Rack

Before rack mounting the switch, pay particular attention to the

following factors:

◆ Temperature: Since the temperature within a rack

assembly may be higher than the ambient room temperature,

check that the rack-environment temperature is within the

specified operating temperature range. (See Appendix C)

◆ Mechanical Loading: Do not place any equipment on top

of a rack-mounted unit.

◆ Circuit Overloading: Be sure that the supply circuit to the

rack assembly is not overloaded.

◆ Grounding: Rack-mounted equipment should be properly

grounded. Particular attention should be given to supply

connections other than direct connections to AC power

mains.

3-4

INSTALLATION

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 112 113

Žádné komentáře

SMC Networks SMC6608M Uživatelský manuál Strana 41